2014Mar - Scuba Camera Dome Port Helmet by Willis Chung
Willis Chung's Gallery
×
  1. Willis Chung's Gallery
  2. 2014Mar - Scuba Camera Dome Port Helmet2014Mar - Scuba Camera Dome Port Helmet

The problem: dome port in carry-on case

Upload Date: Mar 6, 2014 08:02 PMViews: 137

No comments yet.

All fields are required, fill in the form.

Comment successfully added.

Comment
Read comment 

Close Comment

Too fragile to be unprotected!

Upload Date: Mar 6, 2014 08:02 PMViews: 113

No comments yet.

All fields are required, fill in the form.

Comment successfully added.

Comment
Read comment 

Close Comment

Hmm, steamer tray from rice cooker!

Upload Date: Mar 6, 2014 08:02 PMViews: 132

No comments yet.

All fields are required, fill in the form.

Comment successfully added.

Comment
Read comment 

Close Comment

Gosh, it just about fits!

Upload Date: Mar 6, 2014 08:02 PMViews: 118

No comments yet.

All fields are required, fill in the form.

Comment successfully added.

Comment
Read comment 

Close Comment

This model rice cooker

Upload Date: Mar 6, 2014 08:02 PMViews: 118

No comments yet.

All fields are required, fill in the form.

Comment successfully added.

Comment
Read comment 

Close Comment

Mark edge to be removed to fit inside shade

Upload Date: Mar 6, 2014 08:03 PMViews: 122

No comments yet.

All fields are required, fill in the form.

Comment successfully added.

Comment
Read comment 

Close Comment

Nip with wire cutters

Upload Date: Mar 6, 2014 08:03 PMViews: 128

No comments yet.

All fields are required, fill in the form.

Comment successfully added.

Comment
Read comment 

Close Comment

With pliers, bend and break off ledge.

Upload Date: Mar 6, 2014 08:03 PMViews: 118

No comments yet.

All fields are required, fill in the form.

Comment successfully added.

Comment
Read comment 

Close Comment

Better to break off too little than too much...

Upload Date: Mar 6, 2014 08:03 PMViews: 118

No comments yet.

All fields are required, fill in the form.

Comment successfully added.

Comment
Read comment 

Close Comment

Keep going around to the end of the cutout

Upload Date: Mar 6, 2014 08:03 PMViews: 108

No comments yet.

All fields are required, fill in the form.

Comment successfully added.

Comment
Read comment 

Close Comment

Use small Shurform file to clean up edge

Upload Date: Mar 6, 2014 08:03 PMViews: 119

No comments yet.

All fields are required, fill in the form.

Comment successfully added.

Comment
Read comment 

Close Comment

Clean up bottom of edge and round it gently.

Upload Date: Mar 6, 2014 08:04 PMViews: 115

No comments yet.

All fields are required, fill in the form.

Comment successfully added.

Comment
Read comment 

Close Comment

Fits great! No part of the helmet touches the dome itself.

Upload Date: Mar 6, 2014 08:04 PMViews: 111

No comments yet.

All fields are required, fill in the form.

Comment successfully added.

Comment
Read comment 

Close Comment

The neoprene cover fits over it all

Upload Date: Mar 6, 2014 08:04 PMViews: 115

No comments yet.

All fields are required, fill in the form.

Comment successfully added.

Comment
Read comment 

Close Comment

Everything fits in the case just like before.

Upload Date: Mar 6, 2014 08:04 PMViews: 111

No comments yet.

All fields are required, fill in the form.

Comment successfully added.

Comment
Read comment 

Close Comment

Scroll To Top

Audio Mute
Prev
Play
Next
Shuffle
Include