A fully digital 8 Gig GoGopher plugged into a USB port!Upload Date: Nov 11, 2012 06:54 PM•Views: 703No comments yet. All fields are required, fill in the form. Comment successfully added. Comment
|
Here is how to convert an analog GoGopher to a 8 Gig digital GoGopher!Upload Date: Nov 6, 2012 03:11 PM•Views: 861No comments yet. All fields are required, fill in the form. Comment successfully added. Comment
|
Get: small USB drive with parallel sides, pen, utility knife, tweezers, double sided foam tape.Upload Date: Nov 6, 2012 03:11 PM•Views: 675No comments yet. All fields are required, fill in the form. Comment successfully added. Comment
|
Place the cap of the thumb drive over the tail, where the drive will be installedUpload Date: Nov 6, 2012 03:11 PM•Views: 673No comments yet. All fields are required, fill in the form. Comment successfully added. Comment
|
Trace around the cap. Note that the cap is slightly smaller than the thumb drive, good! No wiggles!Upload Date: Nov 6, 2012 03:11 PM•Views: 563No comments yet. All fields are required, fill in the form. Comment successfully added. Comment
|
With a very sharp utility knife score the lines, then cut deeply.Upload Date: Nov 6, 2012 03:11 PM•Views: 727No comments yet. All fields are required, fill in the form. Comment successfully added. Comment
|
Clean up the hole and test fit the thumb drive. It's better if the hole is slightly too small.Upload Date: Nov 6, 2012 03:12 PM•Views: 620No comments yet. All fields are required, fill in the form. Comment successfully added. Comment
|
Build up a platform of strips of double sided foam tape inside.Upload Date: Nov 6, 2012 03:12 PM•Views: 587No comments yet. All fields are required, fill in the form. Comment successfully added. Comment
|
A pair of tweezers helps place the strips.Upload Date: Nov 6, 2012 03:12 PM•Views: 585No comments yet. All fields are required, fill in the form. Comment successfully added. Comment
|
Use the back end of the tweezers to press the foam strips down.Upload Date: Nov 6, 2012 03:12 PM•Views: 582No comments yet. All fields are required, fill in the form. Comment successfully added. Comment
|
As the strips get toward the bottom of the edge of the hole, put lumps of extra tape on the end.Upload Date: Nov 6, 2012 03:12 PM•Views: 609No comments yet. All fields are required, fill in the form. Comment successfully added. Comment
|
Place the drive into the hole, correct side up! Angle it up, away from the double sided tape.Upload Date: Nov 6, 2012 03:12 PM•Views: 620No comments yet. All fields are required, fill in the form. Comment successfully added. Comment
|
When the drive is at the correct depth, angle it down, onto the tape.Upload Date: Nov 6, 2012 03:12 PM•Views: 590No comments yet. All fields are required, fill in the form. Comment successfully added. Comment
|
A fully digital GoGopher, far superior to the conventional analog version!Upload Date: Nov 6, 2012 03:12 PM•Views: 1227No comments yet. All fields are required, fill in the form. Comment successfully added. Comment
|
Thousands of uses! Good for home, office, or recreation!Upload Date: Nov 6, 2012 03:12 PM•Views: 666No comments yet. All fields are required, fill in the form. Comment successfully added. Comment
|
No comments yet...
All fields are required, fill in the form.
Comment successfully added.
Comment